Engine crankcase separating tool - heavy duty
Engine lock nut socket driver - CBR 1000 R / RR O.D. 27mm. I.D. 20.1mm. 4 Pins. Pin width 5.6mm.
Engine mounting lock nut driver. O.D. 27mm. I.D. 20mm. 4 Pins, pin width 4.6mm.
Special ratchet wrench for HD Dyna exhaust bracket
Exhaust flange nut driver. All Bevel Drive Ducati
Face pin set. Adjustable. Heavy duty. Pin sizes: 2.5, 3.0, 4.0, 5.0
Flat spanner 30 - 32 mm. 12 point. Confused by 12-point nuts? A 12-point nut is simply two hexagons overlaid at 30° to each other. The size is me...
View full details
DS A 137-55 – Flywheel extractor – Uses ½” square drive or 24mm and 41mm wrench. Thread pitch M55 x 1.50. Compatible with 1199, 1299 Panigale. Equi...
View full details
Sold out
Compatible with most Ducati models from 2001 – Current EXCEPT Panigale range. Equivalent to Ducati P/N 88713.2036, 88713.2101, 88713.3367
O.D. 48 mm, 58 mm long. Inside thread M36 x P1.5. Female thread.
Folding chain breaker for chain pin sizes 530, 428 & 420.
Fork air pump with gauge. Fits Schrader valves (also called American valve).
Fork bleeding tool. 10, 12, 14. Damper rod recovery
Fork cap driver deisgned for FGRT series Ohlins forks. 1/2" SQUARE / 27mm HEX DRIVE 4 pins Ø38mm PCD with protection o-rings Material anodized al...
View full details
Fork cap driver designed for OEM series Ohlins forks as found on Ducati Panigale 1199S and Yamaha R1 2015. 3/8" square / 24 mm hex drive 4 pins on...
View full details
Fork cap driver designed for older FG series Ohlins forks. This tool will not fit newer FGRT forks and cartridge kits. 3/8" square / 24 mm hex dr...
View full details
A3589 - Fork cap wrench. 49 mm 'KYB' - Honda / Yamaha / Kawasaki 4 stroke MX A3588 - Fork cap wrench. 50 mm 'Showa' - Honda / Kawasaki / Suzuki ...
View full details
Fork Damper Seal Head Tool - Suzuki. Single element fork
Fork installer kit - Triumph / BSA / Norton
Fork oil level guage. Check and adjust liquid levels in forks.
Fork seal driver. Expanding type. 26 - 45 mm
